Smart Controller For Lighting

NEMA NB-IoT smart streetlight controller.jpg

NB-IoT Nema Intelligent Controller for exterior luminaries

● Description:

Designed to improve the efficiency and functionality of street light systems, making them smarter, more energy-efficient, and easier to manage. C-LUX NB-IoT (Narrowband Internet of Things) streetlight smart controller is an advanced device that uses NB-IoT technology to monitor and control street light systems remotely.

● Feature and Benefits:

► Nema standard: play and plug for easy-installation and maintenance

► low-power wide area network (LPWAN) technology

► Direct plug into NB- IoT card connect with the existing cellular networks and no need gateway.

► Long distance control for on/off,dimming of single or group street light,timing,etc strategy control automatically

► Automatic program for dimming,off/on,timer,etc after setting

► Alarm for repair automatically

► Smart city ready

► Energy-saving and low carbon,up to 60%

► Outdoor use for waterproof,snow-proof,lightning protection,IP66

product details

product tags

Overview

The c-Lux Street Light Smart Controller is an innovative device that uses NB-IoT technology to monitor and control street light systems remotely. The controller can be easier to install various street lights built with NEMA (National Electrical Manufacturers Association) sockets and a 0-10V/PWM (Pulse Width Modulation) dimming driver inside. By leveraging NB-IoT, the smart controller enables real-time data transmission, allowing city managers to optimize energy use, increase safety, and improve overall city management.

Functions and Characteristics

►Enables individual remote program managements,ON / OFF / Dimming timers of streetlight lamps with DALI 2 / DiiA / Osram DEXAL / Philips SR control gear.

►Autonomous operation based on predefined schedules, light level sensor and adaptive lighting.

►Adaptive lighting capabilities based on DALI digital input for motion sensing(optional)

►Auto-commission with built-in GPS module

►Bandwidth efficient with minimal communication requirements.

►Secure communication based on encryption keys.

►Electrical parameters monitoring: (measured by DALI2 driver): V, W, A, Wh, PF and frequency.

►Advanced data synchronization and notification mechanism.

►Internal high precision Real time clock (RTC) with backup battery.

►External infrared interface for local configuration.

►Integrated light level sensor.

►Over The Air (OTA) firmware update.

► Alarm for repair automatically

Automatic positioning system for the lighting devices to facilitate management, control, maintenance of lighting devices better.

Device status and real-time insightcontrol stay connected to your network.

Dimming for dynamic lighting maximise your benefits by associating sensors with grous of luminaires to trigger pre-defined lighting scenarios.

Firmware ota system for new function updating.

Individual or group control for light schedule program your lighting.

Maintenance system organise field operations through a fully intergrated maintenance system that will help you optimise your assetmanagement and maintenance.

Multi-tenant configure and manage different zonrs independently.

On-off for light schedule program your lighting.

Reports, alarms and data analytics anticipate and real time.

Timming for dynamic lighting schedule maximise your benefits by associating sensors with grous of luminaires to trigger pre-defined lighting scenarios.

Datasheet

Smart streetlight NEMA luminaire controller for Gen2 smart streetlight management system
Lamp Type	LED, CF, HID with DALI 2 / DiiA / Osram DEXAL / Philips SR control gear/C-LUX
Load Power	Depending on the lamp control gear
MCU	ARM-Coretex-M3
Dimming Range	1%-100%
Control Interface	Analog 1-10 V / 0-10 V / DALI Logarithmic/PWM
Power Supply	AC 100-277V
External Interface	infrared
Network Interface	4G/3G/2G(Cat1)/NB-IoT
Frequencies	2.4G
Internet Protocol	IPv4/IPv6
Inter-Node Communication	Optionally available, with motion sensor or GIS add-on
Average Power	0.5W
Maximum Tower	2W
Precision Real Time Clock	Battery operated
Real-time Lamp Operation	Yes
Digital Input	1x dry contact (for PIR sensor, photocell sensor, open door sensor etc.)
Add-on Customizable	Title sensor,GIS add-on
IP Level	IP66(IP66 (IEC 60529)
Mounting	5pin NEMA socket (ANSI C136.41) Plug and play
Size	80 x 49 mm
Operating Temperature	-25°C to +65°C
Compliant Standards	• RED Directive: LVD Directive & protection of health (EN IEC 62368-1, EN IEC 62479), EMC Directive (ETSI EN 301 489-1, ETSI EN 301 489-52), Efficient use of radio spectrum (ETSI EN 301 908-1, ETSI EN 301 908-13, ETSI EN 303 413) • RoHS Directive • Environmental Testing: EN 60068-2-1, EN 60068-2-2 Certifications CE