Smart Controller For Lighting

NEMA PLC smart streetlight controller.jpg

PLC-IoT NEMA luminaire controller for C-Lux Gen2 smart street light management system

● Description:

C-LUX PLC-IoT street light controller adopts broadband power line communication technology, which uses existing power lines to communicate without additional wiring and reduces construction costs. The communication speed is fast, and the peak rate at the physical layer can reach 0.507Mbit/s. This controller uses orthogonal frequency division multiplexing (OFDM) modulation technology with strong robustness. Automatic fast networking is supported. A maximum of 15 level trunks are supported over a long distance.

PLC streetlight controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status, etc.

It can be installed for C-Lux LED street light products and is suitable for projectors for municipal road lighting, garden landscape lighting, outdoor public area lighting, etc.

● Feature and Benefits:

►PLC-IoT protocol and free with signal wiring

►Combined with PLC-Iot central gateway.

►NEMA socket (ANSI C136.41)

►Up to 60% Energy Savings and CO2 prevention,Lower light pollution

►Up to 50% reduction in maintenance costs

►Open API for Smart City Ready

►Specially designed and optimized for Mesh networks.

►Outdoor use for waterproof,snow-proof,lightning protection

►Designed lifetime: 10+ years.

product details

product tags

Overview

Designed to provide advanced lighting control for urban environments,C-Lux innovative PLC street light controller offers a range of features and capabilities that make it an essential component of smart street lighting infrastructure.

Functions and Characteristics

►Enables individual remote program managements,ON / OFF / Dimming timers of streetlight lamps with 0-10V/PWM control gear.

►Autonomous operation based on predefined schedules, light level sensor and adaptive lighting.

►Adaptive lighting capabilities based on 0-10V digital input for motion sensing(optional)

►Auto-commission with built-in GPS module

►Bandwidth efficient with minimal communication requirements.

►Secure communication based on encryption keys.

►Electrical parameters monitoring: (measured by 0-10V/PWM driver): V, W, A, Wh, PF and frequency.

►Advanced data synchronization and notification mechanism.

►Internal high precision Real time clock (RTC) with backup battery.

►External infrared interface for local configuration.

►Integrated light level sensor.

►Over The Air (OTA) firmware update.

► Alarm for repair automatically

Automatic positioning system for the lighting devices to facilitate management, control, maintenance of lighting devices better.

Device status and real-time insightcontrol stay connected to your network.

Dimming for dynamic lighting maximise your benefits by associating sensors with grous of luminaires to trigger pre-defined lighting scenarios.

Firmware ota system for new function updating.

Individual or group control for light schedule program your lighting.

Maintenance system organise field operations through a fully intergrated maintenance system that will help you optimise your assetmanagement and maintenance.

Multi-tenant configure and manage different zonrs independently.

On-off for light schedule program your lighting.

Reports, alarms and data analytics anticipate and real time.

Timming for dynamic lighting schedule maximise your benefits by associating sensors with grous of luminaires to trigger pre-defined lighting scenarios.

Datasheet

PL- IoT Mesh NEMA smart streetlight controller of streetlight for C-Lux Gen2 smart street light management system
Lamp Type	LED, CF, HID with 0-10V/PWM control gear
Load Power	Depending on the lamp control gear
Additional controlled devices	Yes, independent controlled via DALI relay
Dimming range	1%-100%
Control interface	Analog 1-10 V / 0-10 V / DALI Logarithmic/PWM
Power supply	AC90-270V
External interface	infrared
Network interface	PLC (Power Line Communication)
Frequencies	0.5-3.7M and 2.5-5.7M (default)
Peak rate	0.507Mbit/s
Sensitivity	<=-80dbm
Inter-node mesh Communication	Optionally available, with motion sensor or GIS add-on
Average power	0.5W
Maximum power	2W
Precision Real Time Clock	Battery operated
Real-time lamp operation	Yes
Digital input	No
IP level	IP66
Size	80 x 49 mm
Operating temperature	-25°C to +65°C
Compliant standards	Radio Equipment Directive (RED), 2014/53/EU / Restriction of the use of certain Hazardous Substances in electrical and electronic equipment Directive (RoHS), 2011/65/EU